Lawsonline™  Directory  Expert Witness  OSHA

Safety Management Associates ~~ SMA
Fairfax Station, Virginia
11300 Lilting Lane, 22039


Contact:  Neil Temple
www.sma-safety.com
703-978-3000 Or Toll Free
smasafety@compuserve.com
11300 Lilting Lane
Fairfax Station, Virginia 22039

Contact:  Neil Temple
www.sma-safety.com
703-978-3000
smasafety@compuserve.com
Safety Management Associates (SMA) was founded in Northern Virginia in 1981 by Neil Temple to provide high quality, innovative Safety, Health and Environmental services to local businesses. Mr. Temple then built a team of credentialed EHS professionals with a proven track record of success.
Safety Management Associates (SMA) has since been called upon by Fortune 500 companies, Federal Government Agencies, the Department of Defense and many of the top law firms in the U.S. and abroad. SMA provides a "one-stop" resource for safety engineering, occupational health and environmental management.
Information:  
Accident Investigations,  Asbestos,  Construction Safety,  Ergonomics,  Hazardous Materials,  Industrial Equipment,  Industrial Hygiene,  Job Safety Analysis,  Machine Safety,  Noise Measurement and Control,  OSHA,  Product Warnings,  Risk Assessment,  Risk Management,  Safety,  Safety Engineering,  Safety Occupational,  Slip, Trip, and Fall,  Surveys and Assessments, 


Safety Management Associates (SMA) was founded in Northern Virginia in 1981 by Neil Temple to provide high quality, innovative Safety, Health and Environmental services to local businesses. Mr. Temple then built a team of credentialed EHS professionals with a proven track record of success.
Safety Management Associates (SMA) has since been called upon by Fortune 500 companies, Federal Government Agencies, the Department of Defense and many of the top law firms in the U.S. and abroad. SMA provides a "one-stop" resource for safety engineering, occupational health and environmental management.

Dr. C.J. Abraham - Scientific Advisory Services, Ltd.
Great Neck, New York
3 Baker Hill Road, 11023


Contact:  Dr. C. J. Abraham, P.E.
http://www.scientificadvisory.com/cv.html
516-482-5374 Or Toll Free
cjabraham1@aol.com
3 Baker Hill Road
Great Neck, New York 11023

Contact:  Dr. C. J. Abraham, P.E.
http://www.scientificadvisory.com/cv.html
516-482-5374
cjabraham1@aol.com
~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~
Information:  
Accident Reconstruction,  ADA,  Allergy,  Amusement Parks,  Analysis,  ANSI Standards,  Apparel,  Asbestos,  Biomedical and Biomechanical Injury Analysis,  Brain Damage Injury,  Chemistry,  Construction Safety,  Consumer Products,  Dangerousness,  Engineering,  Fire and Explosions,  Flammable Fabrics,  Hazardous Materials,  Head Injury,  Household Industrial Products,  Human Factors,  Industrial Accidents,  Industrial Hygiene,  Labels and Warnings,  OSHA,  Park and Playground Accidents,  Personal Injury,  Product Liability,  Risk Assessment,  Safety,  Safety Engineering,  Safety Occupational,  Slip, Trip, and Fall,  Sports and Recreation,  Swimming Pools,  Toxic Exposures,  Toy Safety Design, 


~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~

Gene Farmer Architecture & Construction Consultant
Miami, Florida
12801 SW 74th Court , 33156


Contact:  Gene Farmer, A.I.A., NCARB, LEED-AP, BD+C
www.GeneFarmerAssociates.com
305-235-7363 Or Toll Free
Gene@GeneFarmerAssociates.com
12801 SW 74th Court
Miami, Florida 33156

Contact:  Gene Farmer, A.I.A., NCARB, LEED-AP, BD+C
www.GeneFarmerAssociates.com
305-235-7363
Gene@GeneFarmerAssociates.com
Gene Farmer - Architecture & Construction Consultant Gene Farmer, AIA, NCARB, LEED-AP, is president of Gene Farmer and Associates, Architects and Planners an award winning architecture firm. He has over thirty five years of experience in the design of numerous residential and commercial projects in Florida, Texas, Illinois and Minnesota.

Mr. Farmer holds a license to practice architecture in the State of Florida, an N.C.A.R.B. Certification, and a Dade County Sub-Builder Certificate. He is also a certified Florida Building Inspector, a certified Florida Building Plans Examiner, a certified International Code Council ICC Commercial Building Inspector and a certified International Code Council ICC Building Plans Examiner. Mr. Farmer currently holds an OSHA 30 hour certification and has been a certified OSHA 500 instructor.

Mr. Farmer has served as an Expert Witness in numerous cases ranging from Construction Defects and Costs to Construction Safety.

Gene Farmer is an Associate Professor and Director of the Undergraduate Program, in the OHL School of Construction, in the College of Engineering and Computing at Florida International University. His teaching specialties include Principles of Construction Management, Building Construction Materials, Sustainable Construction, Building Codes, Quality Control in Construction, and Electrical, Mechanical and Plumbing Systems in Buildings.

In addition to his book entitled Architectural Detailing for Commercial Construction, published by McGraw Hill in 1991, he has a book entitled “A Contractor’s Guide to LEED Certified Construction” which was published in 2013 by Delmar-Cengage
Information:  
Architecture,  Building Code Compliance,  Construction Accidents,  Construction Defects,  Construction Safety,  Design Patent Infringement,  OSHA, 


Gene Farmer - Architecture & Construction Consultant Gene Farmer, AIA, NCARB, LEED-AP, is president of Gene Farmer and Associates, Architects and Planners an award winning architecture firm. He has over thirty five years of experience in the design of numerous residential and commercial projects in Florida, Texas, Illinois and Minnesota.

Mr. Farmer holds a license to practice architecture in the State of Florida, an N.C.A.R.B. Certification, and a Dade County Sub-Builder Certificate. He is also a certified Florida Building Inspector, a certified Florida Building Plans Examiner, a certified International Code Council ICC Commercial Building Inspector and a certified International Code Council ICC Building Plans Examiner. Mr. Farmer currently holds an OSHA 30 hour certification and has been a certified OSHA 500 instructor.

Mr. Farmer has served as an Expert Witness in numerous cases ranging from Construction Defects and Costs to Construction Safety.

Gene Farmer is an Associate Professor and Director of the Undergraduate Program, in the OHL School of Construction, in the College of Engineering and Computing at Florida International University. His teaching specialties include Principles of Construction Management, Building Construction Materials, Sustainable Construction, Building Codes, Quality Control in Construction, and Electrical, Mechanical and Plumbing Systems in Buildings.

In addition to his book entitled Architectural Detailing for Commercial Construction, published by McGraw Hill in 1991, he has a book entitled “A Contractor’s Guide to LEED Certified Construction” which was published in 2013 by Delmar-Cengage

Safety Priority Consultants, LLC
Cromwell, Connecticut
110 Court Street, Suite 1, 06416


Contact:  Chip Darius, OHST, CET, CSHO, CUSP
www.safetypriority.com/expertwitness.html
860-978-9899 Or Toll Free 800-809-0059
info@safetypriority.com
110 Court Street, Suite 1
Cromwell, Connecticut 06416

Contact:  Chip Darius, OHST, CET, CSHO, CUSP
www.safetypriority.com/expertwitness.html
860-978-9899 Or Toll Free 800-809-0059
info@safetypriority.com
25 years of OSHA Compliance Consulting & Training for construction, general industry and utilities.
Fatality, Castastrophic Injury, Personal Injury, and Workplace Health and Safety cases.
14 years as Regional Faculty for OSHA Training Institute Region 1 Education Center and Keene State College.
Ives certified trainer for mobile equipment.
Information:  
Aerial Lifts,  Building Code Compliance,  Construction Accidents,  Construction Safety,  Fall Protection,  Fall Protection,  Forklifts,  Ladders and Manlifts,  OSHA,  Slip, Trip, and Fall,  Training Programs, 


25 years of OSHA Compliance Consulting & Training for construction, general industry and utilities.
Fatality, Castastrophic Injury, Personal Injury, and Workplace Health and Safety cases.
14 years as Regional Faculty for OSHA Training Institute Region 1 Education Center and Keene State College.
Ives certified trainer for mobile equipment.

Safety Through Engineering, Inc.
New Carlisle, Ohio
9363 Detrick Jordan Pike, 45344


Contact:  Michael C. Wright, MSCE, PE, CSP, CPE, President
www.ste4u.com
937-964-1900 Or Toll Free
mikewright@ste4u.com
9363 Detrick Jordan Pike
New Carlisle, Ohio 45344

Contact:  Michael C. Wright, MSCE, PE, CSP, CPE, President
www.ste4u.com
937-964-1900
mikewright@ste4u.com
Information:  
Amusement Parks,  ANSI Standards,  Code Compliance,  Confined Space,  Construction Accidents,  Construction Defects,  Construction Safety,  Cranes,  Engineering,  Failure Analysis,  Fall Protection,  Job Safety Analysis,  Machine Safety,  OSHA,  Product Liability,  Safety,  Safety Audit,  Safety Engineering,  Slip, Trip, and Fall,  Structural Engineering,  Structural Failure,  Training Programs,  Wrongful Death, 



1 Source Safety and Health, Inc.
Exton, Pennsylvania
140 S. Village Avenue, Suite 130, 19341


Contact:  Christian M. Schneider
www.1ssh.com
610-524-5525 Or Toll Free 888-873-9983
cschneider@1ssh.com
140 S. Village Avenue, Suite 130
Exton, Pennsylvania 19341

Contact:  Christian M. Schneider
www.1ssh.com
610-524-5525 Or Toll Free 888-873-9983
cschneider@1ssh.com
1Source Safety and Health, Inc. has a diverse staff of professionals who have expertise from the initial investigation to identifying the issues, origin, causation, and sources through the development of expert reports, depositions, arbitration, and providing expert testimony in court.
Information:  
Accident Investigations,  Construction Safety,  Indoor Air Quality,  Industrial Accidents,  Industrial Hygiene,  Mold and Moisture,  OSHA,  Safety Occupational, 


1Source Safety and Health, Inc. has a diverse staff of professionals who have expertise from the initial investigation to identifying the issues, origin, causation, and sources through the development of expert reports, depositions, arbitration, and providing expert testimony in court.

E4 Consulting, Inc.
Jacksonville, Florida
4600 Touchton Road
Building 100, Suite 150, 32246


Contact:  Dr. Paul Eason
www.e4consulting.com
904-279-9300 Or Toll Free 888-504-5454
paul.eason@e4consulting.com
4600 Touchton Road
Building 100, Suite 150
Jacksonville, Florida 32246

Contact:  Dr. Paul Eason
www.e4consulting.com
904-279-9300 Or Toll Free 888-504-5454
paul.eason@e4consulting.com
e4 Consulting provides engineering solutions for industry and the legal community. Our Expertise comes from years of combined training and experience in academia, industry and ccnsulting. We assist clients in issues of property loss, litigation, project risk assessment and process safety. Our approach to investigation, analysis, and research follows all applicable codes and standards, to provide the most reliable and reproducible results and opinions. We are availableto immediatley serve clients throughout the nation and abroad.
Information:  
Failure Analysis,  Fall Protection,  Fire and Explosions,  Fire Origin and Cause,  Industrial Accidents,  Metallurgy,  OSHA,  Product Liability, 


e4 Consulting provides engineering solutions for industry and the legal community. Our Expertise comes from years of combined training and experience in academia, industry and ccnsulting. We assist clients in issues of property loss, litigation, project risk assessment and process safety. Our approach to investigation, analysis, and research follows all applicable codes and standards, to provide the most reliable and reproducible results and opinions. We are availableto immediatley serve clients throughout the nation and abroad.

Midwest Compliance Consultants, Inc. Safety Professionals
Davenport, Iowa
9 Archer Court , 52804


Contact:  Scott Jeffries
www.mcci-safety.com
563-529-3558 Or Toll Free
scottj@mcci-safety.com
Safety Professionals
9 Archer Court
Davenport, Iowa 52804

Contact:  Scott Jeffries
www.mcci-safety.com
563-529-3558
scottj@mcci-safety.com
International - Midwest Compliance Consultants, Inc., is a safety consulting firm which offers services in the areas of Construction Safety Management and OSHA compliance for General Industry. Some of our services include safety audits, customized safety training, written safety programs, job hazard assessments & record keeping analysis.
Information:  
Code Compliance,  Construction Safety,  Flammable Fabrics,  Forensic Safety,  Hazardous Materials,  Industrial Accidents,  Occupational Injury,  OSHA,  Safety,  Slip, Trip, and Fall, 


International - Midwest Compliance Consultants, Inc., is a safety consulting firm which offers services in the areas of Construction Safety Management and OSHA compliance for General Industry. Some of our services include safety audits, customized safety training, written safety programs, job hazard assessments & record keeping analysis.

The Kilpatrick Group, P.A.
Jamestown, North Carolina
3397 Cherrybrook Drive, 27282


Contact:  Gary E. Kilpatrick
http://www.gekandassociates.com/
336-841-6354 Or Toll Free
kilpatrickg1@northstate.net
3397 Cherrybrook Drive
Jamestown, North Carolina 27282

Contact:  Gary E. Kilpatrick
http://www.gekandassociates.com/
336-841-6354
kilpatrickg1@northstate.net

Gary E. Kilpatrick CV

Gary E. Kilpatrick and Associates, P.A. is a forensics engineering firm dedicated to the application of the art, science and methodology of engineering and the scientific method to answer questions of fact in the jurisprudence system pertaining to personal injury and wrongful death concerning accidents and product defects and failures.
Information:  
Accident Investigations,  Accident Reconstruction,  Aerial Lifts,  Amusement Parks,  Analysis,  ANSI Standards,  Automobile Accidents,  Automotive,  Commercial Vehicle Accident Reconstruction,  Computer Animation,  Conveyors,  Cranes,  Crash Data Retrieval,  Elevators and Escalators,  Farms and Farm Safety,  Food Manufacturing,  Forensic Engineering,  Forklifts,  Human Factors,  Industrial Accidents,  Industrial Equipment,  Job Safety Analysis,  Labels and Warnings,  Ladders and Manlifts,  Machine Safety,  Manufacturing Accidents,  Material Handling,  Motorcycle Accident Reconstruction,  OSHA,  Pipeline Pressure Vessels Failure,  Product Warnings,  Safety,  Safety Audit,  Safety Engineering,  Safety Occupational,  Warehouse and Storage,  Workers' Compensation, 


Gary E. Kilpatrick CV

Gary E. Kilpatrick and Associates, P.A. is a forensics engineering firm dedicated to the application of the art, science and methodology of engineering and the scientific method to answer questions of fact in the jurisprudence system pertaining to personal injury and wrongful death concerning accidents and product defects and failures.

911 Consulting
Wilton, Connecticut
Mitchell Park, 20 Indian Hill Road, 06897


Contact:  Bo Mitchell
www.911Consulting.net
203-563-9999 Or Toll Free
Intel@911Consulting.net
Mitchell Park, 20 Indian Hill Road
Wilton, Connecticut 06897

Contact:  Bo Mitchell
www.911Consulting.net
203-563-9999
Intel@911Consulting.net
Failure to plan and failure to train. These negligent behaviors on part of workplaces are where Bo Mitchell can serve as an expert. Bo Mitchell has 26 years of experience and 23 certifications in emergency response, disaster recovery business continuity, crisis management and pandemic planning, training and exercises.
Information:  
Crisis and Emergency Planning for Businesses,  Disaster Recovery Planning,  Emergency Management,  Homeland Security,  OSHA,  Risk Management,  Training Programs, 


Failure to plan and failure to train. These negligent behaviors on part of workplaces are where Bo Mitchell can serve as an expert. Bo Mitchell has 26 years of experience and 23 certifications in emergency response, disaster recovery business continuity, crisis management and pandemic planning, training and exercises.

DNA Industrial Hygiene
Manhattan Beach, California
111 N. Sepulveda Blvd.,Ste 355, 90266


Contact:  Dan Napier
http://www.cihcsp.com/
310-644-1924 Or Toll Free 800-644-1924
dan@cihcsp.com
111 N. Sepulveda Blvd.,Ste 355
Manhattan Beach, California 90266

Contact:  Dan Napier
http://www.cihcsp.com/
310-644-1924 Or Toll Free 800-644-1924
dan@cihcsp.com
Dan Napier has over 30 years experience in the Industrial Hygiene, Health & Safety field. He has an extensive practice involving Plant Safety, Construction Site Safety & Health oversight. He actively teaches, and practices Industrial Hygiene and Occupational Safety.
Information:  
Industrial Hygiene,  OSHA,  Safety, 


Dan Napier has over 30 years experience in the Industrial Hygiene, Health & Safety field. He has an extensive practice involving Plant Safety, Construction Site Safety & Health oversight. He actively teaches, and practices Industrial Hygiene and Occupational Safety.

Occupational Safety Resource Inc.
Seattle, Washington
14900 Interuban Avenue South, Suite 271-B, 98168


Contact:  Michelle A. Copeland
http://www.cihsafety.com/home.html
206-729-5018 Or Toll Free
michelle.copeland@gmail.com
14900 Interuban Avenue South, Suite 271-B
Seattle, Washington 98168

Contact:  Michelle A. Copeland
http://www.cihsafety.com/home.html
206-729-5018
michelle.copeland@gmail.com
Certified Industrial Hygienist (CIH). 35 years’ experience occupational safety and health. OSHA and MSHA expert, including chemical exposure (carbon monoxide, benzene, asbestos, diesel exhaust, hexavalent chromium, lead, etc.); noise; confined space entry; ladders and scaffolds; slips, trips, falls; fall protection; forklifts and other powered industrial trucks; Part 46 training; workplace emergency response; multiple employer worksites. Experience in industries including manufacturing, construction, mining, maritime, office environments, and hazardous waste sites."
Information:  
Confined Space,  Construction Safety,  Fall Protection,  Industrial Accidents,  Industrial Hygiene,  Ladders and Manlifts,  Occupational Injury,  OSHA,  Slip, Trip, and Fall,  Workers' Compensation, 


Certified Industrial Hygienist (CIH). 35 years’ experience occupational safety and health. OSHA and MSHA expert, including chemical exposure (carbon monoxide, benzene, asbestos, diesel exhaust, hexavalent chromium, lead, etc.); noise; confined space entry; ladders and scaffolds; slips, trips, falls; fall protection; forklifts and other powered industrial trucks; Part 46 training; workplace emergency response; multiple employer worksites. Experience in industries including manufacturing, construction, mining, maritime, office environments, and hazardous waste sites."

On-going Safety and Health Advice
Spring Branch, Texas
, 78070


Contact:  Sandra Whitaker, CSHO, Managing Principal
On-going Safety and Health Advice Website
210-209-8929 Or Toll Free
sandi@oshadvicetexas.com

Spring Branch, Texas 78070

Contact:  Sandra Whitaker, CSHO, Managing Principal
On-going Safety and Health Advice Website
210-209-8929
sandi@oshadvicetexas.com
ON-GOING SAFETY & HEALTH ADVICE, identifies safety hazards in the workplace, provides safety training for employees and advises management in correcting safety issues. Our proficiency in litigation support and consulting is in Case Analysis; Accident Investigation; Written Programs; OSHA 29 CFR 1910, 29 CFR 1926 - Audits, Regulation Compliance, Record-keeping, and Response to Citation and Inspections from the initial investigation to identifying the issues, causation, and sources through the development of comprehensive reports, depositions, arbitration, and providing expert testimony in court. Sandra Whitaker provides expert witness services and has more than 40 years of personal experience in the field of Occupational Safety. She has worked in various industries including Warehouse, Heavy Manufacturing, Logistics, Food & Beverage, Service Industries and Construction. After completing more than 200 hours of dedicated Safety & Health training, Sandi was awarded the designation of Certified Safety and Health Official (CSHO) from the U.S. Department of Labor – Occupational Safety & Health Administration. Sandra is a U.S. Department of Labor – Occupational Safety & Health Administration Authorized Trainer for General Industry. She also holds both an Associate of Applied Science and Bachelor of Science degree in Occupational Safety and Health.
Information:  
Accident Investigations,  OSHA,  Safety,  Safety Occupational, 


ON-GOING SAFETY & HEALTH ADVICE, identifies safety hazards in the workplace, provides safety training for employees and advises management in correcting safety issues. Our proficiency in litigation support and consulting is in Case Analysis; Accident Investigation; Written Programs; OSHA 29 CFR 1910, 29 CFR 1926 - Audits, Regulation Compliance, Record-keeping, and Response to Citation and Inspections from the initial investigation to identifying the issues, causation, and sources through the development of comprehensive reports, depositions, arbitration, and providing expert testimony in court. Sandra Whitaker provides expert witness services and has more than 40 years of personal experience in the field of Occupational Safety. She has worked in various industries including Warehouse, Heavy Manufacturing, Logistics, Food & Beverage, Service Industries and Construction. After completing more than 200 hours of dedicated Safety & Health training, Sandi was awarded the designation of Certified Safety and Health Official (CSHO) from the U.S. Department of Labor – Occupational Safety & Health Administration. Sandra is a U.S. Department of Labor – Occupational Safety & Health Administration Authorized Trainer for General Industry. She also holds both an Associate of Applied Science and Bachelor of Science degree in Occupational Safety and Health.

PEG, Inc. Experts Professional Engineering Group
Birmingham, Alabama
950 22nd Street North, Suite 632, 35203


Contact:  Lamar T. Hawkins, J.D., P.E.
www.peginc.biz
205-458-8516 Or Toll Free
lthpc@aol.com
Experts Professional Engineering Group
950 22nd Street North, Suite 632
Birmingham, Alabama 35203

Contact:  Lamar T. Hawkins, J.D., P.E.
www.peginc.biz
205-458-8516
lthpc@aol.com
"Free telephone conference call about your case." ---------- Serving the Southeast Region.
Information:  
Accident Reconstruction,  Building Code Compliance,  Civil Construction and Engineering,  Civil Engineering,  Electrical Engineering,  Fall Protection,  Mechanical Engineering,  Motor Vehicles,  OSHA,  Premises Liability,  Safety,  Safety Engineering,  Slip, Trip, and Fall,  Structural Engineering,  Trucking, 


"Free telephone conference call about your case." ---------- Serving the Southeast Region.

Traffic Safety Consultants
Kansas City, Missouri
P.O. Box 25436, 64119


Contact:  Catherine G. Witt
http://www.traffic-safety-consultants.com/
816-813-6232 Or Toll Free
movetraffic@aol.com
P.O. Box 25436
Kansas City, Missouri 64119

Contact:  Catherine G. Witt
http://www.traffic-safety-consultants.com/
816-813-6232
movetraffic@aol.com
I am a Temporary Traffic Control Specialist and have been in the industry for 30+ years. With my Associates we have a combined experience of over 100+ years in Traffic Control. While working for the City of Overland Park, KS as a Traffic Control Technician in the Traffic Engineering Division, some of my duties included Plan Review of the plans submitted for work in the city limits, Right of Way Permit review for necessary temporary traffic control plans, Redesign of the City handbook specific to temporary traffic control including the municipal codes which pertained to them, Design of Temporary Traffic Control Patterns for in house designs, design of Special Event plans for all events including marathons, festivals, parades and any impediment of traffic in the city limits. One of the duties I was asked to perform was in house training of maintenance personnel, parks and recreation personnel, inspectors and any other personnel who were subject to live traffic while performing their duties. I continued my teaching through American Traffic Safety Services Association better known by the acronym of ATSSA. I have been instructing through the ATSSA for 17 years and have trained over 20,000 people to date. Some of the courses I teach for ATSSA are; The Traffic Control Technician, Traffic Control Supervisor, Flagger Instructor train the trainer, Pavement Marking Technician, Effective use of Law Enforcement in Construction, Emergency Traffic Control for first responders, Night time Traffic Control, etc. Some of the state specific courses I teach are for the states of CA, FL, TX and VA along with many others. These state specific courses are taught based on the various States Standard drawings, State Standard Specifications for Road and Bridge, state specific Approved Products or Qualified Products list and various other documents which the state references for design, inspection and implementation.
Information:  
Code Compliance,  OSHA,  Personal Injury,  Traffic Engineering,  Transportation, 


I am a Temporary Traffic Control Specialist and have been in the industry for 30+ years. With my Associates we have a combined experience of over 100+ years in Traffic Control. While working for the City of Overland Park, KS as a Traffic Control Technician in the Traffic Engineering Division, some of my duties included Plan Review of the plans submitted for work in the city limits, Right of Way Permit review for necessary temporary traffic control plans, Redesign of the City handbook specific to temporary traffic control including the municipal codes which pertained to them, Design of Temporary Traffic Control Patterns for in house designs, design of Special Event plans for all events including marathons, festivals, parades and any impediment of traffic in the city limits. One of the duties I was asked to perform was in house training of maintenance personnel, parks and recreation personnel, inspectors and any other personnel who were subject to live traffic while performing their duties. I continued my teaching through American Traffic Safety Services Association better known by the acronym of ATSSA. I have been instructing through the ATSSA for 17 years and have trained over 20,000 people to date. Some of the courses I teach for ATSSA are; The Traffic Control Technician, Traffic Control Supervisor, Flagger Instructor train the trainer, Pavement Marking Technician, Effective use of Law Enforcement in Construction, Emergency Traffic Control for first responders, Night time Traffic Control, etc. Some of the state specific courses I teach are for the states of CA, FL, TX and VA along with many others. These state specific courses are taught based on the various States Standard drawings, State Standard Specifications for Road and Bridge, state specific Approved Products or Qualified Products list and various other documents which the state references for design, inspection and implementation.

Ellis Litigation Support
Wilmington, Delaware
306 Country Club Drive , 19803-2920


Contact:  Dr. J. Nigel Ellis Ph.D., Principal, CSP, P.E., CPE
www.fallsafety.com
302-571-8470 Or Toll Free 800-372-7775
dsc@fallsafety.com
306 Country Club Drive
Wilmington, Delaware 19803-2920

Contact:  Dr. J. Nigel Ellis Ph.D., Principal, CSP, P.E., CPE
www.fallsafety.com
302-571-8470 Or Toll Free 800-372-7775
dsc@fallsafety.com
Ellis Litigation Support (ELS) is headed by Dr. J. Nigel Ellis a leading authority on fall protection. Dr. Ellis has more than 40 years of safety engineering experience. Based upon his unsurpassed experience and knowledge, Dr. Ellis has performed fall hazard assessments in hundreds of facilities and construction sites and has been retained as an expert witness in approximately 1000 fall-related cases nationwide. Dr. Ellis’ participation has led to multi-million dollar settlements/awards in a number of cases and exoneration of defendants in others. Through his work with OSHA and as an ANSI and ASTM committee member, including providing comments and testimony before OSHA hearings, Dr. Ellis has been instrumental in the development of various OSHA regulations and ANSI standards. Dr. Ellis has written the seminal textbook, Introduction to Fall Protection currently in its fourth edition and published by the American Society of Safety Engineers and available for purchase on the ELS web site www.FallSafety.com. Dr. Ellis is a founder and board member of the International Society for Fall Protection and is a frequent speaker at the national conventions of the American Society of Safety Engineers and the National Safety Council. Dr. Ellis also is a published member of the National Academy of Forensic Engineers and is a regular contributor to Compliance Magazine the Greyhouse Safet Directory
Information:  
Ergonomics,  Fall Protection,  Human Factors,  OSHA,  Slip, Trip, and Fall,  Structural Engineering, 


Ellis Litigation Support (ELS) is headed by Dr. J. Nigel Ellis a leading authority on fall protection. Dr. Ellis has more than 40 years of safety engineering experience. Based upon his unsurpassed experience and knowledge, Dr. Ellis has performed fall hazard assessments in hundreds of facilities and construction sites and has been retained as an expert witness in approximately 1000 fall-related cases nationwide. Dr. Ellis’ participation has led to multi-million dollar settlements/awards in a number of cases and exoneration of defendants in others. Through his work with OSHA and as an ANSI and ASTM committee member, including providing comments and testimony before OSHA hearings, Dr. Ellis has been instrumental in the development of various OSHA regulations and ANSI standards. Dr. Ellis has written the seminal textbook, Introduction to Fall Protection currently in its fourth edition and published by the American Society of Safety Engineers and available for purchase on the ELS web site www.FallSafety.com. Dr. Ellis is a founder and board member of the International Society for Fall Protection and is a frequent speaker at the national conventions of the American Society of Safety Engineers and the National Safety Council. Dr. Ellis also is a published member of the National Academy of Forensic Engineers and is a regular contributor to Compliance Magazine the Greyhouse Safet Directory

Interactive Consulting, Inc. Specializing in Product Liability, Personal Injury & Chemical Technology
East Norwich, New York
P.O. Box 66, 11732


Contact:  Meyer R. Rosen
Interactive Consulting, Inc. WEBSITE
516-922-2167 Or Toll Free
meyer_rosen@earthlink.net
Specializing in Product Liability, Personal Injury & Chemical Technology
P.O. Box 66
East Norwich, New York 11732

Contact:  Meyer R. Rosen
Interactive Consulting, Inc. WEBSITE
516-922-2167
meyer_rosen@earthlink.net
Meyer R. Rosen's experience includes, but is not limited to over 25 years industrial chemical work, more than 20 years as a Forensic Expert in personal injury, product liability and intellectual property and he has been an Adjunct Professor of Fire Science for 15 years. Mr. Rosen is a recognized expert in hazardous chemicals & their use and application. He serves as an expert witness and consultant for both plaintiff and defense attorneys in the field of technical product liability issues related, but not limited to: fires, explosions, hazardous chemicals, chemical burns, toxic exposures & intellectual property matters. Meyer is President of Interactive Consulting, Inc. and provides Technical Marketing & product development services worldwide. He is Editor-in-Chief of the 2,600 page book trilogy Harry’s Cosmeticology, 9th ed. www.harryscosmeticology.com and Editor-in-Chief- North & Latin America: EuroCosmetics Magazine ► Credentials: Fellow: American College of Forensic Examiners; Chartered Chemist and Fellow: Royal Society Chemistry (London); Fellow: American Institute of Chemists; Nationally Certified Professional Chemist and Professional Chemical Engineer; Nationally Certified Fire & Explosion Investigator (Advanced Training); Diplomate: American Board of Forensic Examiners; Diplomate: American Board of Forensic Engineering and Technology
Information:  
Chemicals,  Chemistry,  Fire and Explosions,  Fire Origin and Cause,  Hazardous Materials,  OSHA, 


Meyer R. Rosen's experience includes, but is not limited to over 25 years industrial chemical work, more than 20 years as a Forensic Expert in personal injury, product liability and intellectual property and he has been an Adjunct Professor of Fire Science for 15 years. Mr. Rosen is a recognized expert in hazardous chemicals & their use and application. He serves as an expert witness and consultant for both plaintiff and defense attorneys in the field of technical product liability issues related, but not limited to: fires, explosions, hazardous chemicals, chemical burns, toxic exposures & intellectual property matters. Meyer is President of Interactive Consulting, Inc. and provides Technical Marketing & product development services worldwide. He is Editor-in-Chief of the 2,600 page book trilogy Harry’s Cosmeticology, 9th ed. www.harryscosmeticology.com and Editor-in-Chief- North & Latin America: EuroCosmetics Magazine ► Credentials: Fellow: American College of Forensic Examiners; Chartered Chemist and Fellow: Royal Society Chemistry (London); Fellow: American Institute of Chemists; Nationally Certified Professional Chemist and Professional Chemical Engineer; Nationally Certified Fire & Explosion Investigator (Advanced Training); Diplomate: American Board of Forensic Examiners; Diplomate: American Board of Forensic Engineering and Technology

Machine Safety Specialists
Lewis Center, Ohio
8595 Columbus Pike #222, 43035


Contact:  Brian P. Huber
www.machinesafetyspecialists.com
740-816-9178 Or Toll Free
BHuber@MachineSafetySpecialists.com
8595 Columbus Pike #222
Lewis Center, Ohio 43035

Contact:  Brian P. Huber
www.machinesafetyspecialists.com
740-816-9178
BHuber@MachineSafetySpecialists.com
If you’re going to worry about the law, worry about OSHA, if you’re going to worry about liability and injury, worry about ANSI. Brian Huber has extensive training and experience with machine safety issues. He has been trained in numerous OSHA classes and has also trained OSHA Compliance Officers numerous times for machine safety. He is an expert in ANSI B11 standards and has trained companies for machine safety in the U.S., Mexico, Germany and Japan. Brian has extensive experience with safety light curtains, interlock switches and safety relays. Control reliability is a major focus and a major issue in at-work injuries involving machines. Brian has trained many companies for control reliability. Lawsuits have been settled based on Brian’s inputs to both plaintiff and defense attorneys.
Information:  
Machine Safety,  OSHA, 


If you’re going to worry about the law, worry about OSHA, if you’re going to worry about liability and injury, worry about ANSI. Brian Huber has extensive training and experience with machine safety issues. He has been trained in numerous OSHA classes and has also trained OSHA Compliance Officers numerous times for machine safety. He is an expert in ANSI B11 standards and has trained companies for machine safety in the U.S., Mexico, Germany and Japan. Brian has extensive experience with safety light curtains, interlock switches and safety relays. Control reliability is a major focus and a major issue in at-work injuries involving machines. Brian has trained many companies for control reliability. Lawsuits have been settled based on Brian’s inputs to both plaintiff and defense attorneys.

MPGroup: Michael S. Poles, GC, CM, RCI, DABFET, ACFE
West Hollywood, California
1202 Greenacre Avenue, 90046-5708


Contact:  Michael S. Poles, GC, CM, RCI, DABFET, ACFE
www.mpgroup.com
323-874-8973 Or Toll Free 800-684-9100
experts@mpgroup.com
1202 Greenacre Avenue
West Hollywood, California 90046-5708

Contact:  Michael S. Poles, GC, CM, RCI, DABFET, ACFE
www.mpgroup.com
323-874-8973 Or Toll Free 800-684-9100
experts@mpgroup.com
Construction Consultants + Forensic Expert Witnesses + Mediation Founded in Los Angeles by Michael S. Poles, MPGroup began in 1962 as a building construction, inspection and consulting firm which has since developed into a collaboration of architects, engineers, contractors and other construction technical experts. Michael S. Poles is unique among construction experts. He is a second generation licensed general building contractor ( California Contractors License No. 263193-B), certified construction manager, registered construction inspector, forensic expert witness and mediator.
Information:  
Architecture,  Construction,  Construction Claims,  Construction Defects,  Construction Safety,  Electrical Engineering,  Forensic Photography,  Mold and Moisture,  OSHA,  Safety,  Structural Engineering,  Structural Failure, 


Construction Consultants + Forensic Expert Witnesses + Mediation Founded in Los Angeles by Michael S. Poles, MPGroup began in 1962 as a building construction, inspection and consulting firm which has since developed into a collaboration of architects, engineers, contractors and other construction technical experts. Michael S. Poles is unique among construction experts. He is a second generation licensed general building contractor ( California Contractors License No. 263193-B), certified construction manager, registered construction inspector, forensic expert witness and mediator.

J.M. Miller Engineering, Inc.
Ann Arbor, Michigan
,


Contact:  James M. Miller
www.millerengineering.com
734-662-6822 Or Toll Free
miller@millerengineering.com

Ann Arbor, Michigan

Contact:  James M. Miller
www.millerengineering.com
734-662-6822
miller@millerengineering.com
Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC). Miller Engineering has a staff of engineers and experts in the Mechanical, Chemical, Agriculture, Industrial, and Human Factors Engineering. Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products. Dr. Miller’s experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.
Information:  
Accident Investigations,  Accident Reconstruction,  Agricultural Engineering,  Construction Safety,  Consumer Products,  Ergonomics,  Fire and Explosions,  Forklifts,  Human Factors,  Industrial Accidents,  Labels and Warnings,  Mechanical Engineering,  OSHA,  Personal Injury,  Slip, Trip, and Fall,  Toxic Exposures,  Toy Safety Design,  Transportation, 


Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC). Miller Engineering has a staff of engineers and experts in the Mechanical, Chemical, Agriculture, Industrial, and Human Factors Engineering. Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products. Dr. Miller’s experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.