Lawsonline™  Directory  Expert Witness  ANSI Standards

Eckstine & Associates
Waynesboro, Pennsylvania
10817 Partridge Drive, 17268


Contact:  Dennis Eckstine
www.eckstine.net
717-762-1555 Or Toll Free

10817 Partridge Drive
Waynesboro, Pennsylvania 17268

Contact:  Dennis Eckstine
www.eckstine.net
717-762-1555

Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled. Typical clients include equipment owners/users, manufacturers, insurance companies, governmental agencies, and the legal community.
Each (E & A) expert has between 8 and 30 years experience in the product safety or engineering departments of major equipment manufacturers. Dennis Eckstine is our principal consultant and he has over 25 years of experience with products liability litigation. Our personnel are frequently noted authorities in the safety and technical aspects of construction and industrial equipment. They include a former Vice President of a key manufacturer of aerial work platforms, a previous Director in the engineering department of a leading manufacturer of cranes, and a former Chief Engineer of a major manufacturer of construction equipment.
Information:  
Aerial Lifts,  ANSI Standards,  Construction Defects,  Construction Safety,  Cranes,  Equipment and Machinery,  Forklifts,  Hydraulics,  Industrial Design,  Industrial Equipment,  Ladders and Manlifts,  Material Handling, 


Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled. Typical clients include equipment owners/users, manufacturers, insurance companies, governmental agencies, and the legal community.
Each (E & A) expert has between 8 and 30 years experience in the product safety or engineering departments of major equipment manufacturers. Dennis Eckstine is our principal consultant and he has over 25 years of experience with products liability litigation. Our personnel are frequently noted authorities in the safety and technical aspects of construction and industrial equipment. They include a former Vice President of a key manufacturer of aerial work platforms, a previous Director in the engineering department of a leading manufacturer of cranes, and a former Chief Engineer of a major manufacturer of construction equipment.

Safety Through Engineering, Inc.
New Carlisle, Ohio
9363 Detrick Jordan Pike, 45344


Contact:  Michael C. Wright, MSCE, PE, CSP, CPE, President
www.ste4u.com
937-964-1900 Or Toll Free
mikewright@ste4u.com
9363 Detrick Jordan Pike
New Carlisle, Ohio 45344

Contact:  Michael C. Wright, MSCE, PE, CSP, CPE, President
www.ste4u.com
937-964-1900
mikewright@ste4u.com
Information:  
Amusement Parks,  ANSI Standards,  Code Compliance,  Confined Space,  Construction Accidents,  Construction Defects,  Construction Safety,  Cranes,  Engineering,  Failure Analysis,  Fall Protection,  Job Safety Analysis,  Machine Safety,  OSHA,  Product Liability,  Safety,  Safety Audit,  Safety Engineering,  Slip, Trip, and Fall,  Structural Engineering,  Structural Failure,  Training Programs,  Wrongful Death, 



Dr. C.J. Abraham - Scientific Advisory Services, Ltd.
Great Neck, New York
3 Baker Hill Road, 11023


Contact:  Dr. C. J. Abraham, P.E.
http://www.scientificadvisory.com/cv.html
516-482-5374 Or Toll Free
cjabraham1@aol.com
3 Baker Hill Road
Great Neck, New York 11023

Contact:  Dr. C. J. Abraham, P.E.
http://www.scientificadvisory.com/cv.html
516-482-5374
cjabraham1@aol.com

Dr. C.J. Abraham's CV

 

~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~
Information:  
Accident Reconstruction,  ADA,  Allergy,  Amusement Parks,  Analysis,  ANSI Standards,  Apparel,  Asbestos,  Biomedical and Biomechanical Injury Analysis,  Brain Damage Injury,  Burn Injury,  Chemistry,  Concussions,  Construction Safety,  Consumer Products,  Dangerousness,  Engineering,  Exercise Facilities,  Fire and Explosions,  Flammable Fabrics,  Foam Pits,  Hazardous Materials,  Head Injury,  Helmets,  Household Industrial Products,  Human Factors,  Industrial Accidents,  Industrial Hygiene,  Labels and Warnings,  OSHA,  Park and Playground Accidents,  Personal Injury,  Product Liability,  Recreation Accidents,  Risk Assessment,  Safety,  Safety Engineering,  Safety Occupational,  Slip, Trip, and Fall,  Sports Accidents,  Sports and Recreation,  Swimming Pools,  Toxic Exposures,  Toy Safety Design,  Trampoline Parks,  Water Parks, 


Dr. C.J. Abraham's CV

 

~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~

A.B.C. Consulting Arborists LLC
Spokane, Washington
12402 North Division #294, 99218


Contact:  Daniel J. Maple, BCMA, RCA, MA, TRAQ, TPAQ
www.AbcArborist.Com
509-953-0293 Or Toll Free
daniel@abcarborist.com
12402 North Division #294
Spokane, Washington 99218

Contact:  Daniel J. Maple, BCMA, RCA, MA, TRAQ, TPAQ
www.AbcArborist.Com
509-953-0293
daniel@abcarborist.com

 Daniel J. Maple's CV


Daniel J. Maple is an ASCA Registered Consulting Arborist, ISA Board Certified Master Arborist, ISA Municipal Specialist, ASCA Tree & Plant Appraisal Qualified (TPAQ), ISA Tree Risk Assessment Qualified (TRAQ), Qualified Tree Farm Inspector, Commercial UAV Airman Pilot, and a Commercial Applicator.

Mr. Maple has provided ethical, scientifically sound, arboriculture solutions to both the public and private sector since 1987. During this time, Mr. Maple owned and operated a tree service, and was a first responder in several natural disasters that resulted in thousands of tree failures. His investigations into the tree failures and the experience gained, makes him uniquely qualified among his peers, as a risk assessor and risk mitigation planner.

Mr. Maple has used his years of hands on experience along with his formal education to provide ethical, unbiased, and scientifically based expert witness services for both plaintiffs and defendants across the U.S.

His areas of expertise include risk assessment, forensic investigation, tree & plant appraisals, timber trespass, peer review of reports & methodology, ANSI Standards & BMP’s, along with expert witness services, opinions and litigation support. Please contact him for an honest and timely review of your case.
Information:  
Accident Investigations,  ANSI Standards,  Appraisal Review,  Appraisers,  Arboriculture,  Arborist,  Forestry, 


 Daniel J. Maple's CV


Daniel J. Maple is an ASCA Registered Consulting Arborist, ISA Board Certified Master Arborist, ISA Municipal Specialist, ASCA Tree & Plant Appraisal Qualified (TPAQ), ISA Tree Risk Assessment Qualified (TRAQ), Qualified Tree Farm Inspector, Commercial UAV Airman Pilot, and a Commercial Applicator.

Mr. Maple has provided ethical, scientifically sound, arboriculture solutions to both the public and private sector since 1987. During this time, Mr. Maple owned and operated a tree service, and was a first responder in several natural disasters that resulted in thousands of tree failures. His investigations into the tree failures and the experience gained, makes him uniquely qualified among his peers, as a risk assessor and risk mitigation planner.

Mr. Maple has used his years of hands on experience along with his formal education to provide ethical, unbiased, and scientifically based expert witness services for both plaintiffs and defendants across the U.S.

His areas of expertise include risk assessment, forensic investigation, tree & plant appraisals, timber trespass, peer review of reports & methodology, ANSI Standards & BMP’s, along with expert witness services, opinions and litigation support. Please contact him for an honest and timely review of your case.

Crane Experts International Inc.
Fairhope, Alabama
PO Box 461, 36533


Contact:  James Pritchett
www.craneexpert.com
251-928-6262 Or Toll Free
pritchettj@aol.com
PO Box 461
Fairhope, Alabama 36533

Contact:  James Pritchett
www.craneexpert.com
251-928-6262
pritchettj@aol.com
Crane Experts International, Inc. is proud to include the following distinctions:

James Pritchett

- James Pritchett has been in business since 1987 under the name of Crane Inspection Services, Inc., my main business. Crane Inspection Services, Inc. is a recognized private agency, accredited by the U.S. Department of Labor under 29 CFR Part 1919, to inspect, test, and issue documents/papers of certification where required on shore-based material handling devices, without limitation, and floating cranes and derricks under the OSHA Maritime Safety Regulations 29 CFR Parts 1915 (shipyards), 1917 (marine terminals), and 1918 (longshoring). Crane Inspection Services, Inc. is capable of load testing, inspecting, and performing training/schools for all types of cranes that are general industry and construction related.

- James Pritchett is past accredited by OSHA to teach courses in Construction Safety and Health Regulations

- James Pritchett is a past instructor for the U.S. Department of Labor and provide training in the 1910 Standards as they apply to cranes.

- James Pritchett is one of a small number of delegates from the United States of Americato the Technical Advisory Group (TAG) within ISO, Technical Committee for Cranes TC96. This committeeformulation of crane safety guidelines.

- James Pritchett is Past President of the Crane Certification Association of America(CCAA). This is a national association that is made up of the maritime agencies nationwide.

Information:  
Accident Injury,  Aerial Lifts,  ANSI Standards,  Construction Safety,  Cranes,  Equipment and Machinery,  Expert Witness at Trial,  Expert Witness Testimonies,  Forklifts,  Industrial Accidents,  Job Safety Analysis,  Labels and Warnings,  Ladders and Manlifts,  Litigation Consulting,  Litigation Support,  Material Handling,  OSHA,  Safety,  Safety Audit,  Safety Engineering,  Ships,  Structural Failure,  Technical,  Training Programs,  Trial Consultants,  Trial Preparation, 


Crane Experts International, Inc. is proud to include the following distinctions:

James Pritchett

- James Pritchett has been in business since 1987 under the name of Crane Inspection Services, Inc., my main business. Crane Inspection Services, Inc. is a recognized private agency, accredited by the U.S. Department of Labor under 29 CFR Part 1919, to inspect, test, and issue documents/papers of certification where required on shore-based material handling devices, without limitation, and floating cranes and derricks under the OSHA Maritime Safety Regulations 29 CFR Parts 1915 (shipyards), 1917 (marine terminals), and 1918 (longshoring). Crane Inspection Services, Inc. is capable of load testing, inspecting, and performing training/schools for all types of cranes that are general industry and construction related.

- James Pritchett is past accredited by OSHA to teach courses in Construction Safety and Health Regulations

- James Pritchett is a past instructor for the U.S. Department of Labor and provide training in the 1910 Standards as they apply to cranes.

- James Pritchett is one of a small number of delegates from the United States of Americato the Technical Advisory Group (TAG) within ISO, Technical Committee for Cranes TC96. This committeeformulation of crane safety guidelines.

- James Pritchett is Past President of the Crane Certification Association of America(CCAA). This is a national association that is made up of the maritime agencies nationwide.