Lawsonline™  Directory  Expert Witness  Electrical Engineering

ElectroQuest, LLC
Oxford, Pennsylvania
101 Covered Bridge Lane, 19363


Contact:  John M. Tobias
http://www.electroquest-llc.com/
732-674-2530 Or Toll Free
jmt@electroquest-llc.com
101 Covered Bridge Lane
Oxford, Pennsylvania 19363

Contact:  John M. Tobias
http://www.electroquest-llc.com/
732-674-2530
jmt@electroquest-llc.com
ElectroQuest is a consulting firm specializing in electrotechnology with expertise encompassing: * Electrical Engineering & Safety (Mishap/Injury, Design for Sites, Systems & Products) * Codes & Standards (OSHA, National Electrical Code, NESC) * Grounding (Test and Evaluation Including Stray Currents) * Intellectual Property (Power Devices, Magnetics, Electrooptics) * Lightning Protection & Safety (Accident, Damage & Injury Investigations) * Radiation Safety (Radio, Lasers, Cell Phones & Towers, Power Lines) * Products (Design, Safety & Standards Compliance) * Illumination (Ambient Lighting Conditions, Mishap Investigation)
Information:  
Electrical,  Electrical Engineering,  Intellectual Properties,  Lighting,  Product Liability,  Safety Engineering, 


ElectroQuest is a consulting firm specializing in electrotechnology with expertise encompassing: * Electrical Engineering & Safety (Mishap/Injury, Design for Sites, Systems & Products) * Codes & Standards (OSHA, National Electrical Code, NESC) * Grounding (Test and Evaluation Including Stray Currents) * Intellectual Property (Power Devices, Magnetics, Electrooptics) * Lightning Protection & Safety (Accident, Damage & Injury Investigations) * Radiation Safety (Radio, Lasers, Cell Phones & Towers, Power Lines) * Products (Design, Safety & Standards Compliance) * Illumination (Ambient Lighting Conditions, Mishap Investigation)

Fire/Reconstruction Consultants, Inc.
Cape Canaveral, Florida
P.O. Drawer 307 , 32920-0307


Contact:  Walter P Godfrey
www.fireexpert.com
321-868-7890 Or Toll Free
fireexpert@fireexpert.com
P.O. Drawer 307
Cape Canaveral, Florida 32920-0307

Contact:  Walter P Godfrey
www.fireexpert.com
321-868-7890
fireexpert@fireexpert.com
Mission Statement: Fire/Reconstruction Consultants, Inc. is in the business of providing Accurate, non-biased Technical Independent Investigations to determine the Origin & Cause of Fires & Explosions in Structures, Vessels & Vehicles for our clients. Our diverse team of Fire & Explosion Investigators, Analysts, Experts, & Forensic Engineers provide; fast mobilization, accurate, thorough, integrity based results along with complete litigation support to Marine, Property, Casualty Insurers, Manufacturers & the Legal Profession Worldwide.

The focus of our final delivered product/service is two-fold:
1st)
We are retained in order to technically determine what occurred, how the loss, injury or wrongful death could have been avoided and who or what was at fault and
2nd) by what is expressed in our Mission Statement. On a more minor point, we would like to say that while complex claims or lawsuits cannot be made completely simple due to the legal terminology or technical explanation required, they can be made clear for the jury to thoroughly understand.
Information:  
Civil Litigation,  Combustion and Incineration,  Earthquake Damage,  Electrical Engineering,  Engineering,  Failure Analysis,  Fire and Explosions,  Fire Forensics,  Fire Origin and Cause,  Fire Protection Investigations,  Forensic Engineering,  Forensic Photography,  Forensic Safety,  Industrial Accidents,  Industrial Engineering,  Manufacturing Accidents,  Mechanical Engineering,  Ships,  Tape Analysis,  Yachts, 


Mission Statement: Fire/Reconstruction Consultants, Inc. is in the business of providing Accurate, non-biased Technical Independent Investigations to determine the Origin & Cause of Fires & Explosions in Structures, Vessels & Vehicles for our clients. Our diverse team of Fire & Explosion Investigators, Analysts, Experts, & Forensic Engineers provide; fast mobilization, accurate, thorough, integrity based results along with complete litigation support to Marine, Property, Casualty Insurers, Manufacturers & the Legal Profession Worldwide.

The focus of our final delivered product/service is two-fold:
1st)
We are retained in order to technically determine what occurred, how the loss, injury or wrongful death could have been avoided and who or what was at fault and
2nd) by what is expressed in our Mission Statement. On a more minor point, we would like to say that while complex claims or lawsuits cannot be made completely simple due to the legal terminology or technical explanation required, they can be made clear for the jury to thoroughly understand.

PEG, Inc. Experts Professional Engineering Group
Birmingham, Alabama
950 22nd Street North, Suite 632, 35203


Contact:  Lamar T. Hawkins, J.D., P.E.
peginc.biz
205-458-8516 Or Toll Free
lthpc@aol.com
Experts Professional Engineering Group
950 22nd Street North, Suite 632
Birmingham, Alabama 35203

Contact:  Lamar T. Hawkins, J.D., P.E.
peginc.biz
205-458-8516
lthpc@aol.com
"Free telephone conference call about your case." ---------- Serving the Southeast Region.
Information:  
Accident Reconstruction,  Building Code Compliance,  Civil Construction and Engineering,  Civil Engineering,  Concrete and Masonry,  Construction Accidents,  Construction Safety,  Cooling Towers,  Electrical Engineering,  Fall Protection,  Mechanical Engineering,  Metallurgy,  Motor Vehicles,  OSHA,  Paint and Coatings,  Premises Liability,  Safety,  Safety Engineering,  Slip, Trip, and Fall,  Structural Engineering,  Trucking, 


"Free telephone conference call about your case." ---------- Serving the Southeast Region.

Automotive Design Analysis
South Lyon, Michigan
10945 Stoney Point, 48178


Contact:  Michael Nranian
www.trialexpertwitness.com
248-376-0338 Or Toll Free
mnranian@charter.net
10945 Stoney Point
South Lyon, Michigan 48178

Contact:  Michael Nranian
www.trialexpertwitness.com
248-376-0338
mnranian@charter.net

Michael Nranian's CV

 

Michael Nranian has over 30 years of experience focusing in Product Development, Intellectual Property, Patent Litigation, Legal and Technical Compliance, & Product Liability Litigation. He is a Six Sigma Black Belt, Professional Engineer, & Certified Project Management Professional. He has an in-depth background and education in Law, Intellectual Property, Electrical, Chemical, & Computer Engineering, Product Liability, & Business. He has testified extensively as an expert witness in depositions, hearings, and trials in state & federal courts. He is also a licensed attorney in Michigan, Texas, & the United States Patent and Trademark Office. He provides and conducts Technical Product and Engineering Analysis, Patentability & Prior Art Research, and provides the Technical, Scientific, & Litigation Support for Intellectual Property. His litigation experience includes patent infringement / non-infringement under literal infringement and the doctrine of equivalents, patent validity / invalidity, prior art, & file-wrapper estoppel, for ITC & Federal cases, including Inter Partes reviews. He conducts analysis of all aspects of intellectual property, including patents and products, prepares claim charts, & expert witness reports. This includes testimony and document preparation for cases before state, and federal court jurisdictions, and the International Trade Commission, and the Patent Trial and Appeal Board. He performs analysis under the America Invents Act, and all 101, 102, 103, 112, and other arguments. His experience includes Technology Standards Boards and Licensing Authorities, Antitrust / DOJ, Technology Development and Transfer, Patents, Trademarks, Trade Secrets, Copyrights, Licensing, Unfair Competition/Trade, False/Deceptive Advertising, & Lanham Act Actions, and Class Actions. His Product Liability Expert Witness litigation background includes all types of Safety Systems, Electrical Systems, Fires, Accident Reconstruction (certified through Northwestern University), and Evaluation of Alternative Designs for Automotive, Medical, Manufacturing, and other industries. He has extensive Testifying Experience. He has over 30 years of experience in Automotive and Safety Systems, Sensors, Seatbelts, Airbags / Curtains, Seats, Electrical/Electronic/Electromechanical Systems and Architecture, Warning & Diagnostic Systems, Sensors and Sensor Fusion, Vision and Camera Optical/Image, Forward Collision/Lane Departure Warning, GPS, Navigation, Telematics, Powertrain, Engine, Cellular/Radio/Wireless/Satellite Communication, Information and Data Transmission, Data & Parameter storage & retrieval, Human Machine Interface, Controls, Crash Recorders, Crash Pulse Analysis, System Diagnostic, Fault Codes, Structure (including roof-crush and door) and Front, Side & Roll-over systems (including sensing and algorithm development), Occupant sensing, computer/microprocessor, software/source code analyses, Monitoring & Surveillance, Automotive & Recreational Vehicles, Trucks/Commercial Vehicles, Fleet Management Systems, Construction & Excavation Vehicles/Equipment, Manufacturing and Product Development for domestic and international corporations. He is thoroughly familiar with all regulatory (including ECE & FMVSS), and corporate due-care & SAE requirements, and preemption arguments, safety standards, occupant kinematics, biomechanics & injury causation as well as OSHA, ANSI, Fall Protection. Complete Forensic Investigations and Analyses.
Information:  
Accident Investigations,  Accident Photo Analysis,  Automotive,  Chemicals,  Chemistry,  Copyright Infringement,  Electrical,  Electrical Engineering,  Electronics,  Engineering,  Failure Analysis,  Forensic Engineering,  Intellectual Properties,  Licensing,  Litigation Support,  Materials Science,  Mechanical Engineering,  Motor Vehicles,  Patents,  Product Liability,  Safety,  Scientific and Engineering,  Telecommunications,  Trademark,  Transportation,  Trucking, 


Michael Nranian's CV

 

Michael Nranian has over 30 years of experience focusing in Product Development, Intellectual Property, Patent Litigation, Legal and Technical Compliance, & Product Liability Litigation. He is a Six Sigma Black Belt, Professional Engineer, & Certified Project Management Professional. He has an in-depth background and education in Law, Intellectual Property, Electrical, Chemical, & Computer Engineering, Product Liability, & Business. He has testified extensively as an expert witness in depositions, hearings, and trials in state & federal courts. He is also a licensed attorney in Michigan, Texas, & the United States Patent and Trademark Office. He provides and conducts Technical Product and Engineering Analysis, Patentability & Prior Art Research, and provides the Technical, Scientific, & Litigation Support for Intellectual Property. His litigation experience includes patent infringement / non-infringement under literal infringement and the doctrine of equivalents, patent validity / invalidity, prior art, & file-wrapper estoppel, for ITC & Federal cases, including Inter Partes reviews. He conducts analysis of all aspects of intellectual property, including patents and products, prepares claim charts, & expert witness reports. This includes testimony and document preparation for cases before state, and federal court jurisdictions, and the International Trade Commission, and the Patent Trial and Appeal Board. He performs analysis under the America Invents Act, and all 101, 102, 103, 112, and other arguments. His experience includes Technology Standards Boards and Licensing Authorities, Antitrust / DOJ, Technology Development and Transfer, Patents, Trademarks, Trade Secrets, Copyrights, Licensing, Unfair Competition/Trade, False/Deceptive Advertising, & Lanham Act Actions, and Class Actions. His Product Liability Expert Witness litigation background includes all types of Safety Systems, Electrical Systems, Fires, Accident Reconstruction (certified through Northwestern University), and Evaluation of Alternative Designs for Automotive, Medical, Manufacturing, and other industries. He has extensive Testifying Experience. He has over 30 years of experience in Automotive and Safety Systems, Sensors, Seatbelts, Airbags / Curtains, Seats, Electrical/Electronic/Electromechanical Systems and Architecture, Warning & Diagnostic Systems, Sensors and Sensor Fusion, Vision and Camera Optical/Image, Forward Collision/Lane Departure Warning, GPS, Navigation, Telematics, Powertrain, Engine, Cellular/Radio/Wireless/Satellite Communication, Information and Data Transmission, Data & Parameter storage & retrieval, Human Machine Interface, Controls, Crash Recorders, Crash Pulse Analysis, System Diagnostic, Fault Codes, Structure (including roof-crush and door) and Front, Side & Roll-over systems (including sensing and algorithm development), Occupant sensing, computer/microprocessor, software/source code analyses, Monitoring & Surveillance, Automotive & Recreational Vehicles, Trucks/Commercial Vehicles, Fleet Management Systems, Construction & Excavation Vehicles/Equipment, Manufacturing and Product Development for domestic and international corporations. He is thoroughly familiar with all regulatory (including ECE & FMVSS), and corporate due-care & SAE requirements, and preemption arguments, safety standards, occupant kinematics, biomechanics & injury causation as well as OSHA, ANSI, Fall Protection. Complete Forensic Investigations and Analyses.

Robert O. Peruzzi, Ph.D., P.E. R. Peruzzi Consulting, Inc.
Bethlehem, Pennsylvania
719 Fourth Avenue, 18018


Contact:  Robert Peruzzi
www.RPeruzzi.com
610-462-3939 Or Toll Free
Peruzzi@RPeruzzi.com
R. Peruzzi Consulting, Inc.
719 Fourth Avenue
Bethlehem, Pennsylvania 18018

Contact:  Robert Peruzzi
www.RPeruzzi.com
610-462-3939
Peruzzi@RPeruzzi.com

Robert O. Peruzzi's CV

Recent Case History ~Person Injured by Remote Control Model Quadcopter ~Business Sale/Purchase Dispute over Semiconductor Test Equipment Manufacturing Capability ~Dispute over Product Requirements, Specifications, and Quality for Video Screens ~Patent Infringement Case Regarding Geo-Location of Mobile Phone Devices ~Wirelessly-Remote-Controlled Drilling Equipment Tragic Failure ~Patent Review and Analysis ~Electronic Toll Collection and Traffic Control Lane Accident Investigation ~Home Electrical Fire Investigation
~Licensed Professional Electrical Engineer
~Expert in Mixed-Signal Electronics & ICs, especially Signal-Processing Chips
~Patent Experience - A/D, D/A Converters & their Calibration
~Electronic Control of Electromechanical Systems
~Forensic Experience - Investigate & Report on an Electromechanical Control System Failure resulting in Injury.
Information:  
Electrical Engineering,  Intellectual Properties,  Microelectronics,  Patents,  Semiconductor, 


Robert O. Peruzzi's CV

Recent Case History ~Person Injured by Remote Control Model Quadcopter ~Business Sale/Purchase Dispute over Semiconductor Test Equipment Manufacturing Capability ~Dispute over Product Requirements, Specifications, and Quality for Video Screens ~Patent Infringement Case Regarding Geo-Location of Mobile Phone Devices ~Wirelessly-Remote-Controlled Drilling Equipment Tragic Failure ~Patent Review and Analysis ~Electronic Toll Collection and Traffic Control Lane Accident Investigation ~Home Electrical Fire Investigation
~Licensed Professional Electrical Engineer
~Expert in Mixed-Signal Electronics & ICs, especially Signal-Processing Chips
~Patent Experience - A/D, D/A Converters & their Calibration
~Electronic Control of Electromechanical Systems
~Forensic Experience - Investigate & Report on an Electromechanical Control System Failure resulting in Injury.

Rod Bergen & Associates, LLC
Calabasas, California
23939 Ventura Boulevard, 91302


Contact:  Rod Bergen, P.E.
Rod Bergen WEBSITE
310-456-1037 Or Toll Free
rodbergen@jps.net
23939 Ventura Boulevard
Calabasas, California 91302

Contact:  Rod Bergen, P.E.
Rod Bergen WEBSITE
310-456-1037
rodbergen@jps.net
Rod Bergen PE has expertise that covers the evaluation of Solar Energy system's performance, installation defects, design deficiencies, wiring problems and Incident Reconstruction. Mr. Bergen has managed the oldest full-service solar company in Southern California. He has been a Solar Energy Instructor since 1977 (including Seminars for Professional Engineers). He is knowledgeable in Electrical Contracting, Solar Engineering & related construction trades and has 40 years of experience in Solar Energy Systems design, installation and monitoring. He has 18 years of prior Aerospace experience as a Computer Systems Analyst & Systems Engineer. Mr. Bergen is a California Superior Court-approved Expert Witness in Solar Energy systems. He is experienced in expert witness deposition preparation & trial testimony.
Information:  
Electrical,  Electrical Engineering,  Energy,  Personal Injury,  Premises Liability,  Solar Energy, 


Rod Bergen PE has expertise that covers the evaluation of Solar Energy system's performance, installation defects, design deficiencies, wiring problems and Incident Reconstruction. Mr. Bergen has managed the oldest full-service solar company in Southern California. He has been a Solar Energy Instructor since 1977 (including Seminars for Professional Engineers). He is knowledgeable in Electrical Contracting, Solar Engineering & related construction trades and has 40 years of experience in Solar Energy Systems design, installation and monitoring. He has 18 years of prior Aerospace experience as a Computer Systems Analyst & Systems Engineer. Mr. Bergen is a California Superior Court-approved Expert Witness in Solar Energy systems. He is experienced in expert witness deposition preparation & trial testimony.

Talex, Inc. Engineers
Austin, Texas
, 78752


Contact:  Thomas R. Alexander, P.E.
http://talexinc.com/
512-451-6579 Or Toll Free
tomalex@talexinc.com

Austin, Texas 78752

Contact:  Thomas R. Alexander, P.E.
http://talexinc.com/
512-451-6579
tomalex@talexinc.com
Thomas R. Alexander is an expert witness with over 40 years experience. His technical expertise along with his sincere honest appearance, his spontaneity, his forthright manner, his ability to present simplified explanations to complex issues, and his convincing arguments in support of his positions are hard to equal. As the Engineer of Record responsible for Design Construction, HVAC, Electrical, and/or Plumbing projects his credentials as an expert witness in the mechanical and electrical engineering fields are impeccable.
Information:  
Construction Defects,  Electrical Engineering,  HVAC Investigations,  Mechanical Engineering,  Plumbing, 


Thomas R. Alexander is an expert witness with over 40 years experience. His technical expertise along with his sincere honest appearance, his spontaneity, his forthright manner, his ability to present simplified explanations to complex issues, and his convincing arguments in support of his positions are hard to equal. As the Engineer of Record responsible for Design Construction, HVAC, Electrical, and/or Plumbing projects his credentials as an expert witness in the mechanical and electrical engineering fields are impeccable.

C L Sandberg Associates LLC Chet Sandberg
Palo Alto, California
758 Torreya Ct, 94303


Contact:  Chet Sandberg

650-493-2770 Or Toll Free
chetsandberg@ieee.org
Chet Sandberg
758 Torreya Ct
Palo Alto, California 94303

Contact:  Chet Sandberg

650-493-2770
chetsandberg@ieee.org
Mr. Sandberg joined the Chemelex Division of Raychem Corporation where he managed technology projects for 30 years. He held various positions at Raychem including Engineer, Product Manager, Consumer Products Division Manager, and Chief Engineer. For the next 6 years, Mr. Sandberg managed the development of a downhole, self-regulating electrical heater technology for Shell Oil. In 2009, he founded C L Sandberg & Associates, a consultancy specializing in Energy Projects.

Mr. Sandberg is now associated with Electrical Energy Storage EPRI, ESA, Sandia, and PNNL, as well as providing due diligence expertise for venture capital and private equity companies on their technical prospective investments. He has been granted 30 United States Patents and has authored over 70 technical papers on energy usage, electric heat tracing, ground fault technology, fiber optics, sensor technology, and personal computers as design tools.

Litigation Support - Mr. Sandberg is a Heat Transfer Expert with successful litigation in Steam and Electrical Heat Tracing. He has written papers on thermal insulation, LNG tank protection, heavy oil production, and appliance heat transfer. He has court room experience, including testifying before the ITC in Washington DC. Mr. Sandberg is available to attorneys for both plaintiff and defendant.
Information:  
Electrical Engineering,  Mechanical Engineering, 


Mr. Sandberg joined the Chemelex Division of Raychem Corporation where he managed technology projects for 30 years. He held various positions at Raychem including Engineer, Product Manager, Consumer Products Division Manager, and Chief Engineer. For the next 6 years, Mr. Sandberg managed the development of a downhole, self-regulating electrical heater technology for Shell Oil. In 2009, he founded C L Sandberg & Associates, a consultancy specializing in Energy Projects.

Mr. Sandberg is now associated with Electrical Energy Storage EPRI, ESA, Sandia, and PNNL, as well as providing due diligence expertise for venture capital and private equity companies on their technical prospective investments. He has been granted 30 United States Patents and has authored over 70 technical papers on energy usage, electric heat tracing, ground fault technology, fiber optics, sensor technology, and personal computers as design tools.

Litigation Support - Mr. Sandberg is a Heat Transfer Expert with successful litigation in Steam and Electrical Heat Tracing. He has written papers on thermal insulation, LNG tank protection, heavy oil production, and appliance heat transfer. He has court room experience, including testifying before the ITC in Washington DC. Mr. Sandberg is available to attorneys for both plaintiff and defendant.

Montrose Compliance Services, Inc.
Santa Clara, California
2353 Mission Glen Drive, 95051


Contact:  Mark Montrose
www.montrosecompliance.com
408-499-5533 Or Toll Free
mark@montrosecompliance.com
2353 Mission Glen Drive
Santa Clara, California 95051

Contact:  Mark Montrose
www.montrosecompliance.com
408-499-5533
mark@montrosecompliance.com
Mark Montrose of Montrose Compliance Services specializes in Electromagnetic Compatibility (EMC) and system level design for domestic and international regulatory requirements. Areas of expertise includes design of printed circuit boards and system integration for commercial and industrial products with over 40years of applied engineering experience. In addition, almost all areas of electrical engineering design is provided by this consultant.

Several expert witness engagements have occurred with an expertise in patent research and application applied to real-world engineering problems. Engagements includes Fortune 500 clients with success. In addition, the principle is a professional instructor for the University of California as well as international training organizations. He has authored five internationally popular textbooks related to system level design to achieve EMC especially at the printed circuit board and system level.

Mark Montrose is a current member of the IEEE EMC Society Board of Directors and past member of the IEEE Board of Directors as the Division VI Director (2009-2010). He is a frequent invited speaker internationally at EMC conferences presenting research on sophisticated engineering designs concerns and issues.
Information:  
Electrical Engineering,  Engineering,  Intellectual Properties,  Patents, 


Mark Montrose of Montrose Compliance Services specializes in Electromagnetic Compatibility (EMC) and system level design for domestic and international regulatory requirements. Areas of expertise includes design of printed circuit boards and system integration for commercial and industrial products with over 40years of applied engineering experience. In addition, almost all areas of electrical engineering design is provided by this consultant.

Several expert witness engagements have occurred with an expertise in patent research and application applied to real-world engineering problems. Engagements includes Fortune 500 clients with success. In addition, the principle is a professional instructor for the University of California as well as international training organizations. He has authored five internationally popular textbooks related to system level design to achieve EMC especially at the printed circuit board and system level.

Mark Montrose is a current member of the IEEE EMC Society Board of Directors and past member of the IEEE Board of Directors as the Division VI Director (2009-2010). He is a frequent invited speaker internationally at EMC conferences presenting research on sophisticated engineering designs concerns and issues.

4x Forensic Engineering Laboratories, Inc.
Huntington Beach, California
5262 Oceanus Drive, 92649


Contact:  Phil Van Herle, P.E.
www.4xforensic.com
714-450-8500 Or Toll Free
phil@4xforensic.com
5262 Oceanus Drive
Huntington Beach, California 92649

Contact:  Phil Van Herle, P.E.
www.4xforensic.com
714-450-8500
phil@4xforensic.com
Mr. Van Herle is a registered professional engineer. He has a wide array of experience in fire & explosion, product defect, accident investigation and failure analysis. His engineering career started in 1992 within the automotive industry conducting power supply and charging component thermal analysis, temperature, environmental & mechanical wear testing for the General Motors EV-1 electric car project. His career design and testing experience includes the areas of electromagnetic, electrical power systems, control systems and machine design of products. Mr. Van Herle has a wide range of computer simulation expertise in the areas of thermal heat transfer analysis, fire modeling, accident reconstruction and multi-physics Finite Element Analysis for stress, fluid flow and heat transfer. Since the year 2000 while working as a forensic engineering expert witness he has conducted several thousand fire & explosion, product defect and accident related case investigations. He has testified over 30 times in deposition and trial and has drafted several Federal trial reports. He has been involved with several Consumer Product Safety Commission product recall investigations. He holds two U.S. patents for products which he designed, prototyped and personally prepared and filed the patent documents.
Information:  
Corrosion Engineering,  Electrical Engineering,  Fire and Explosions,  Mechanical Engineering,  Metallurgy, 


Mr. Van Herle is a registered professional engineer. He has a wide array of experience in fire & explosion, product defect, accident investigation and failure analysis. His engineering career started in 1992 within the automotive industry conducting power supply and charging component thermal analysis, temperature, environmental & mechanical wear testing for the General Motors EV-1 electric car project. His career design and testing experience includes the areas of electromagnetic, electrical power systems, control systems and machine design of products. Mr. Van Herle has a wide range of computer simulation expertise in the areas of thermal heat transfer analysis, fire modeling, accident reconstruction and multi-physics Finite Element Analysis for stress, fluid flow and heat transfer. Since the year 2000 while working as a forensic engineering expert witness he has conducted several thousand fire & explosion, product defect and accident related case investigations. He has testified over 30 times in deposition and trial and has drafted several Federal trial reports. He has been involved with several Consumer Product Safety Commission product recall investigations. He holds two U.S. patents for products which he designed, prototyped and personally prepared and filed the patent documents.

Robertson Engineering Investigations LLC
Mesilla Park, New Mexico
P.O. Box 820, 88047


Contact:  Cale Robertson, MSME, PE, CFI-IAAI, ACTAR
http://www.reifire.net
575-644-9595 Or Toll Free
rei@reifire.net
P.O. Box 820
Mesilla Park, New Mexico 88047

Contact:  Cale Robertson, MSME, PE, CFI-IAAI, ACTAR
http://www.reifire.net
575-644-9595
rei@reifire.net
Robertson Engineering Investigations, LLC (REI) is a private forensic engineering firm that provides forensic engineering services to both the insurance and legal communities. REI experts are court qualified Licensed Professional Engineers with extensive training, experience and certifications related to fire investigation, fire science, accident investigation and reconstruction, and general product failure analysis. REI investigators hold the distinguished Certified Fire Investigator (CFI-IAAI) certification and are also certified accident reconstructionists through the Accreditation Commission for Traffic Accident Reconstruction (ACTAR). REI is dedicated to providing accurate, complete and timely investigations that are based on scientific principles. Identifying the root origin and cause of incidents, which have significant cost in terms of either pain and suffering or monetary loss, is the only way for society to correct, improve and/or remove defective products from harms way. This is why REI is dedicated to identifying the facts and the root cause of such incidents and will not become an advocate for one party or another. REI Location Google Maps Zoomed Out REI's regular service areas include New Mexico, Texas and Arizona, including Albuquerque, Santa Fe, Las Cruces, El Paso, Dallas, Phoenix, and Tucson. REI staff are fluent in Spanish.
Information:  
Accident Investigations,  Accident Reconstruction,  Commercial Vehicle Accident Reconstruction,  Construction Accidents,  Construction Claims,  Construction Defects,  Electrical Engineering,  Engineering,  Failure Analysis,  Fire and Explosions,  Fire Origin and Cause,  Fire Protection Investigations,  Forensic,  Forensic Engineering,  Hail Damages,  Lab Testing and Analysis,  Mechanical Engineering,  Motorcycle Accident Reconstruction,  Product Failure,  Reconstruction,  Roofing,  Roofing and Waterproofing,  Slip, Trip, and Fall,  Structural Engineering,  Structural Failure,  Stucco, 


Robertson Engineering Investigations, LLC (REI) is a private forensic engineering firm that provides forensic engineering services to both the insurance and legal communities. REI experts are court qualified Licensed Professional Engineers with extensive training, experience and certifications related to fire investigation, fire science, accident investigation and reconstruction, and general product failure analysis. REI investigators hold the distinguished Certified Fire Investigator (CFI-IAAI) certification and are also certified accident reconstructionists through the Accreditation Commission for Traffic Accident Reconstruction (ACTAR). REI is dedicated to providing accurate, complete and timely investigations that are based on scientific principles. Identifying the root origin and cause of incidents, which have significant cost in terms of either pain and suffering or monetary loss, is the only way for society to correct, improve and/or remove defective products from harms way. This is why REI is dedicated to identifying the facts and the root cause of such incidents and will not become an advocate for one party or another. REI Location Google Maps Zoomed Out REI's regular service areas include New Mexico, Texas and Arizona, including Albuquerque, Santa Fe, Las Cruces, El Paso, Dallas, Phoenix, and Tucson. REI staff are fluent in Spanish.

Direentech Inc.
Colorado Springs, Colorado
2750 Old North Gate Rd , 80921


Contact:  Harry Direen PhD, PE
www.direentech.com
877-869-5201 Or Toll Free
hdireen@direentech.com
2750 Old North Gate Rd
Colorado Springs, Colorado 80921

Contact:  Harry Direen PhD, PE
www.direentech.com
877-869-5201
hdireen@direentech.com
Information:  
Computer Software,  Electrical Engineering,  Electronics,  Engineering,  Patents,  Software, 



Gilbeaux Associates
Voorhees, New Jersey
P.O. Box 782, 08043


Contact:  Jeffrey Gilbeaux PE
www.gilbeauxassociates.com
856-988-1890 Or Toll Free
info@gilbeauxassociates.com
P.O. Box 782
Voorhees, New Jersey 08043

Contact:  Jeffrey Gilbeaux PE
www.gilbeauxassociates.com
856-988-1890
info@gilbeauxassociates.com
I have extensive experience in the heating, ventilating and air conditioning (HVAC) design and construction industry, including as head of energy savings performance contracting for Johnson Controls, a building automation manufacturer; as department head for the Trane company in Baltimore, a major manufacturer of HVAC equipment; and more than ten years of experience as engineer and project manager for HVAC design build and energy conservation projects for Burns Mechanical, a large mechanical contracting company in Philadelphia.

My design experience includes hospitals and health care; pharmaceutical; data centers; restaurants; commercial office buildings; retail, refrigerated storage and hospitality and multifamily residential facilities..

I have experience with claims such as frozen sprinkler lines, furnace puffbacks, fire damage due to HVAC or electrical probems, boiler and chiller failures and engineering design errors and omissions related to HVAC and refrigeration claims..

I have extensive experience in the following: 1. Heating, ventilating and air conditioning system design and equipment failure in buildings 2. Electrical design including switchgear, distribution feeders, utility demand peak shaving, solar design 3. Plumbing domestic water design including cross connection review and certified backflow prevention testing 4. Sanitary systems design per local codes 5. Building Automation (BAS) also called Direct Digital Controls (DDC) systems and integration 6. Low voltage signal & alarm systems such as fire alarm systems, school clock/intercom system, nurses call, etc. 7. Refrigeration systems for pharmaceutical sample storage and for food storage. 8. Building commissioning 9. Special inspections such as smoke evacuation systems, elevators, etc..

I have testing and inspection equipment for HVAC, electrical systems, plumbing and sprinkler systems..

My education includes Bachelor of Science engineering degree from Drexel University and post graduate masters degree work at Penn State University. I am a licensed professional engineering in multiple states and a notary so I am a sworn member of the court..

My website www.gilbeauxassociates.com has further information. Please contact me for a current CV.
Information:  
Electrical Engineering,  Fire Sprinklers,  HVAC Investigations,  Mechanical Engineering,  Plumbing, 


I have extensive experience in the heating, ventilating and air conditioning (HVAC) design and construction industry, including as head of energy savings performance contracting for Johnson Controls, a building automation manufacturer; as department head for the Trane company in Baltimore, a major manufacturer of HVAC equipment; and more than ten years of experience as engineer and project manager for HVAC design build and energy conservation projects for Burns Mechanical, a large mechanical contracting company in Philadelphia.

My design experience includes hospitals and health care; pharmaceutical; data centers; restaurants; commercial office buildings; retail, refrigerated storage and hospitality and multifamily residential facilities..

I have experience with claims such as frozen sprinkler lines, furnace puffbacks, fire damage due to HVAC or electrical probems, boiler and chiller failures and engineering design errors and omissions related to HVAC and refrigeration claims..

I have extensive experience in the following: 1. Heating, ventilating and air conditioning system design and equipment failure in buildings 2. Electrical design including switchgear, distribution feeders, utility demand peak shaving, solar design 3. Plumbing domestic water design including cross connection review and certified backflow prevention testing 4. Sanitary systems design per local codes 5. Building Automation (BAS) also called Direct Digital Controls (DDC) systems and integration 6. Low voltage signal & alarm systems such as fire alarm systems, school clock/intercom system, nurses call, etc. 7. Refrigeration systems for pharmaceutical sample storage and for food storage. 8. Building commissioning 9. Special inspections such as smoke evacuation systems, elevators, etc..

I have testing and inspection equipment for HVAC, electrical systems, plumbing and sprinkler systems..

My education includes Bachelor of Science engineering degree from Drexel University and post graduate masters degree work at Penn State University. I am a licensed professional engineering in multiple states and a notary so I am a sworn member of the court..

My website www.gilbeauxassociates.com has further information. Please contact me for a current CV.

Richard M. Hansen & Associates
Lombard, Illinois
265 Eisenhower Lane South, 60148


Contact:  Steven Claxton PE, CFEI
www.rmhansen.com
630-495-3853 Or Toll Free 800-319-2632

265 Eisenhower Lane South
Lombard, Illinois 60148

Contact:  Steven Claxton PE, CFEI
www.rmhansen.com
630-495-3853 Or Toll Free 800-319-2632

Richard M. Hansen & Associates, Inc. provides answers for electrical and fire related questions. Many investigations include immediate response nationwide to emergencies. The Company's clients include manufacturers, utilities, legal counsel, insurance companies, government agencies and interested parties that require answers as to why a fire occurred and whether electricity was involved in the cause of the fire. RMHA has been in business for over 18 years and continues to provide immediate response service with professionalism and integrity. Many of the Company's consultants and investigators have over 20 years experience in the electrical utility industry and fire service.
Information:  
Electrical Engineering,  Fire and Explosions,  Fire Protection Investigations,  Forensic Engineering,  Materials Science, 


Richard M. Hansen & Associates, Inc. provides answers for electrical and fire related questions. Many investigations include immediate response nationwide to emergencies. The Company's clients include manufacturers, utilities, legal counsel, insurance companies, government agencies and interested parties that require answers as to why a fire occurred and whether electricity was involved in the cause of the fire. RMHA has been in business for over 18 years and continues to provide immediate response service with professionalism and integrity. Many of the Company's consultants and investigators have over 20 years experience in the electrical utility industry and fire service.