Lawsonline™  Directory  Expert Witness  Industrial Accidents

E4 Consulting, Inc.
Jacksonville, Florida
4600 Touchton Road
Building 100, Suite 150, 32246


Contact:  Dr. Paul Eason
www.e4consulting.com
904-279-9300 Or Toll Free 888-504-5454
paul.eason@e4consulting.com
4600 Touchton Road
Building 100, Suite 150
Jacksonville, Florida 32246

Contact:  Dr. Paul Eason
www.e4consulting.com
904-279-9300 Or Toll Free 888-504-5454
paul.eason@e4consulting.com
Dr. Paul Eason at E4 Consulting provides engineering solutions for industry and the legal community. Our Expertise comes from years of combined training and experience in academia, industry and ccnsulting. We assist clients in issues of property loss, litigation, project risk assessment and process safety. Our approach to investigation, analysis, and research follows all applicable codes and standards, to provide the most reliable and reproducible results and opinions. We are availableto immediatley serve clients throughout the nation and abroad.
Information:  
Failure Analysis,  Fire and Explosions,  Fire Forensics,  Fire Origin and Cause,  Industrial Accidents,  Metallurgy,  OSHA,  Product Liability, 


Dr. Paul Eason at E4 Consulting provides engineering solutions for industry and the legal community. Our Expertise comes from years of combined training and experience in academia, industry and ccnsulting. We assist clients in issues of property loss, litigation, project risk assessment and process safety. Our approach to investigation, analysis, and research follows all applicable codes and standards, to provide the most reliable and reproducible results and opinions. We are availableto immediatley serve clients throughout the nation and abroad.

Midwest Compliance Consultants, Inc. Safety Professionals
Bettendorf, Iowa
1820 Grant Street, PMB 5204, 52722


Contact:  Scott Jeffries
www.mccisafety.com
563-529-3558 Or Toll Free
scottj@mcci-safety.com
Safety Professionals
1820 Grant Street, PMB 5204
Bettendorf, Iowa 52722

Contact:  Scott Jeffries
www.mccisafety.com
563-529-3558
scottj@mcci-safety.com
International - Midwest Compliance Consultants, Inc., is a safety consulting firm which offers services in the areas of Construction Safety Management and OSHA compliance for General Industry. Some of our services include safety audits, customized safety training, written safety programs, job hazard assessments & record keeping analysis.
Information:  
Code Compliance,  Construction Safety,  Flammable Fabrics,  Forensic Safety,  Hazardous Materials,  Industrial Accidents,  Occupational Injury,  OSHA,  Safety,  Slip, Trip, and Fall,  Workplace Injury,  Workplace Safety, 


International - Midwest Compliance Consultants, Inc., is a safety consulting firm which offers services in the areas of Construction Safety Management and OSHA compliance for General Industry. Some of our services include safety audits, customized safety training, written safety programs, job hazard assessments & record keeping analysis.

Page Engineering Inc.
Ontario,
115 Main Street South, Georgetown L7G 3E5,


Contact:  Greg Weames, MSc, CPE, CCPE, CRSP / George B Page, BSE, MSE, CPE
https://www.pageengineering.net
905-703-1171 Or Toll Free
gweames@pageengineering.net
115 Main Street South, Georgetown L7G 3E5
Ontario,

Contact:  Greg Weames, MSc, CPE, CCPE, CRSP / George B Page, BSE, MSE, CPE
https://www.pageengineering.net
905-703-1171
gweames@pageengineering.net

Steven Fleming, Greg Weames, and George Page's CV's

Page Engineering Inc.,
established in 1980, is an Ergonomics and Industrial Engineering consulting firm. We have provided services to clients in most all parts of the United States and Canada. Our hands-on approach is backed by extensive research and measurement of actual work exposure to occupational physical factors and workplace design. Mr. Weames has been a practicing ergonomist for almost 20 years and is professionally certified in both the United States and Canada. Having been involved in over 250 cases as a retained expert witness, Mr. Weames has experience with most all musculoskeletal injury and disorder type of claims. Page Engineering Inc. has office locations in Jackson, MI and Georgetown, ON.
Information:  
Biomechanics,  Ergonomics,  Human Factors,  Industrial Accidents,  Industrial Engineering,  Industrial Equipment,  Industrial Hygiene,  Job Safety Analysis,  Machine Safety,  Manufacturing Accidents,  Material Handling,  Occupational Injury,  Safety,  Work Zone and Flagger Safety,  Workplace Injury,  Workplace Safety, 


Steven Fleming, Greg Weames, and George Page's CV's

Page Engineering Inc.,
established in 1980, is an Ergonomics and Industrial Engineering consulting firm. We have provided services to clients in most all parts of the United States and Canada. Our hands-on approach is backed by extensive research and measurement of actual work exposure to occupational physical factors and workplace design. Mr. Weames has been a practicing ergonomist for almost 20 years and is professionally certified in both the United States and Canada. Having been involved in over 250 cases as a retained expert witness, Mr. Weames has experience with most all musculoskeletal injury and disorder type of claims. Page Engineering Inc. has office locations in Jackson, MI and Georgetown, ON.

J.M. Miller Engineering, Inc.
Ann Arbor, Michigan
2392 Fuller Court, 48105


Contact:  J.M. Miller
www.millerengineering.com
734-662-6822 Or Toll Free
miller@millerengineering.com
2392 Fuller Court
Ann Arbor, Michigan 48105

Contact:  J.M. Miller
www.millerengineering.com
734-662-6822
miller@millerengineering.com
Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC).
Miller Engineering has a staff of engineers and experts in the Mechanical, Chemical, Agriculture, Industrial, and Human Factors Engineering.
Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products.
Dr. Miller’s experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.
Information:  
Accident Investigations,  Accident Reconstruction,  Agricultural Engineering,  Construction Safety,  Consumer Products,  Ergonomics,  Fire and Explosions,  Forklifts,  Human Factors,  Industrial Accidents,  Labels and Warnings,  Mechanical Engineering,  OSHA,  Personal Injury,  Product Warnings,  Slip, Trip, and Fall,  Toxic Exposures,  Toy Safety Design,  Transportation,  Work Zone and Flagger Safety, 


Dr. Miller is an Emeritus Professor at the University of Michigan College of Engineering and a registered professional engineer and consultant with over 30 years of experience as an engineering expert witness. He specializes in warnings, labeling and instruction manuals, consumer product design, machine guarding, process safety, fire science, vehicle visibility, tractor egress/ingress, pedestrian and worker slip and fall prevention, COF testing, recreational vehicle safety (boats, ATVs and personal watercraft), compliance with occupational safety and consumer safety standards (OSHA, MSDS, ANSI, ASTM, UL, CPSC).
Miller Engineering has a staff of engineers and experts in the Mechanical, Chemical, Agriculture, Industrial, and Human Factors Engineering.
Dr. Miller has recently authored a chapter titled Hazard Communication Compliance in the Safety Engineering Handbook for ASSE. Dr. Miller has authored five books on the topic of Warnings and Safety Instructions and hundreds of journal articles. He is also currently a committee member of the ASTM Technical Committee F15 on Consumer Products.
Dr. Miller’s experience includes the following: Bachelor of Mechanical Engineering (1963), M.B.A. (1965), and Ph.D. in Industrial Engineering (1971), Ohio State University. Owens-Corning Fiberglass (1964-1967): Corporate Methods Engineer. The University of Michigan (1970-present): Industrial and Operations Engineering (IOE) Professor, teaching courses in human factors/ergonomics, safety, engineering law, and labor relations. U.S. Department of Labor (1975-1977): Special Assistant for Safety, Assistant Secretary of Labor.

Read Consulting, LLC - Failure Analysis
Santa Rosa, California
1435 Fulton Road , 95403


Contact:  Thomas L. Read, PhD
www.readconsulting.com
707-494-5089 Or Toll Free 800-520-2374
tread@sonic.net
1435 Fulton Road
Santa Rosa, California 95403

Contact:  Thomas L. Read, PhD
www.readconsulting.com
707-494-5089 Or Toll Free 800-520-2374
tread@sonic.net
Information:  
Failure Analysis,  Food Manufacturing,  Glass,  Industrial Accidents,  Paint and Coatings,  Patents, 



Dr. C.J. Abraham - Scientific Advisory Services, Ltd.
Great Neck, New York
3 Baker Hill Road, 11023


Contact:  Dr. C. J. Abraham, P.E.
http://www.scientificadvisory.com/cv.html
516-974-7565 Or Toll Free
cjabraham1@gmail.com
3 Baker Hill Road
Great Neck, New York 11023

Contact:  Dr. C. J. Abraham, P.E.
http://www.scientificadvisory.com/cv.html
516-974-7565
cjabraham1@gmail.com

Dr. C.J. Abraham's CV

 

~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~ Office phone number: 516-482-5374
Information:  
Accident Reconstruction,  ADA,  Amusement Parks,  Apparel,  Biomedical Injury Analysis,  Brain Damage Injury,  Brain Injuries,  Burn Injury,  Chemical Engineering,  Chemistry,  Concussions,  Construction Safety,  Consumer Products,  Exercise Facilities,  Fire and Explosions,  Fires and Explosion,  Flammable Fabrics,  Foam Pits,  Hazardous Materials,  Helmets,  Household Industrial Products,  Human Factors,  Industrial Accidents,  Industrial Hygiene,  Labels and Warnings,  OSHA,  Park and Playground Accidents,  Personal Injury,  Product Liability,  Recreation Accidents,  Risk Assessment,  Safety,  Safety Engineering,  Safety Occupational,  Slip, Trip, and Fall,  Sports Accidents,  Sports and Recreation,  Swimming Pools,  Textile and Clothing Industry,  Toxic Exposures,  Toy Safety Design,  Trampoline Parks,  Water Parks, 


Dr. C.J. Abraham's CV

 

~Over 40 Years of International Experience Consulting to Insurance Companies, Municipalities, Government Agencies, and the Legal Profession in Personal Injury & Product Liability Cases. In Addition, Consultation and Participation in More than 5,000 Matters involving Human Factors, Safety, Personal Injury & Product Liability for Plaintiffs, Defendants, Private Industry, Insurance Companies, Municipalities, and Government Agencies.~ Office phone number: 516-482-5374

Crane Experts International Inc.
Fairhope, Alabama
PO Box 461, 36533


Contact:  James Pritchett
www.craneexpert.com
251-928-6262 Or Toll Free
pritchettj@aol.com
PO Box 461
Fairhope, Alabama 36533

Contact:  James Pritchett
www.craneexpert.com
251-928-6262
pritchettj@aol.com
Crane Experts International, Inc. is proud to include the following distinctions:

James Pritchett

- James Pritchett has been in business since 1987 under the name of Crane Inspection Services, Inc., my main business. Crane Inspection Services, Inc. is a recognized private agency, accredited by the U.S. Department of Labor under 29 CFR Part 1919, to inspect, test, and issue documents/papers of certification where required on shore-based material handling devices, without limitation, and floating cranes and derricks under the OSHA Maritime Safety Regulations 29 CFR Parts 1915 (shipyards), 1917 (marine terminals), and 1918 (longshoring). Crane Inspection Services, Inc. is capable of load testing, inspecting, and performing training/schools for all types of cranes that are general industry and construction related.

- James Pritchett is past accredited by OSHA to teach courses in Construction Safety and Health Regulations

- James Pritchett is a past instructor for the U.S. Department of Labor and provide training in the 1910 Standards as they apply to cranes.

- James Pritchett is one of a small number of delegates from the United States of Americato the Technical Advisory Group (TAG) within ISO, Technical Committee for Cranes TC96. This committeeformulation of crane safety guidelines.

- James Pritchett is Past President of the Crane Certification Association of America(CCAA). This is a national association that is made up of the maritime agencies nationwide.

Information:  
Accident Injury,  Aerial Lifts,  ANSI Standards,  Construction Safety,  Cranes,  Equipment and Machinery,  Expert Witness at Trial,  Expert Witness Testimonies,  Forklifts,  Industrial Accidents,  Job Safety Analysis,  Labels and Warnings,  Ladders and Manlifts,  Litigation Consulting,  Litigation Support,  Material Handling,  OSHA,  Safety,  Safety Audit,  Safety Engineering,  Ships,  Structural Failure,  Technical,  Training Programs,  Trial Consultants,  Trial Preparation, 


Crane Experts International, Inc. is proud to include the following distinctions:

James Pritchett

- James Pritchett has been in business since 1987 under the name of Crane Inspection Services, Inc., my main business. Crane Inspection Services, Inc. is a recognized private agency, accredited by the U.S. Department of Labor under 29 CFR Part 1919, to inspect, test, and issue documents/papers of certification where required on shore-based material handling devices, without limitation, and floating cranes and derricks under the OSHA Maritime Safety Regulations 29 CFR Parts 1915 (shipyards), 1917 (marine terminals), and 1918 (longshoring). Crane Inspection Services, Inc. is capable of load testing, inspecting, and performing training/schools for all types of cranes that are general industry and construction related.

- James Pritchett is past accredited by OSHA to teach courses in Construction Safety and Health Regulations

- James Pritchett is a past instructor for the U.S. Department of Labor and provide training in the 1910 Standards as they apply to cranes.

- James Pritchett is one of a small number of delegates from the United States of Americato the Technical Advisory Group (TAG) within ISO, Technical Committee for Cranes TC96. This committeeformulation of crane safety guidelines.

- James Pritchett is Past President of the Crane Certification Association of America(CCAA). This is a national association that is made up of the maritime agencies nationwide.